IEPE DYNAMIC INSTRUMENTS
PCB ICP®, HBK & Dytran Replacement Review
Compare existing IEPE accelerometer requirements against IEP request profiles using electrical, mechanical and measurement checks.
Request a matched configuration →Original references → IEP configuration review
This is a routing table for an engineering inquiry, not an approved cross-reference or a claim of 1:1 interchangeability.
| Original family / example | Request profile | Decisive checks |
|---|---|---|
| PCB 352C03 / 352C33 / 603C01; HBK 4507 / 4508; Dytran 3055D | IEP-UNI | Sensitivity, usable frequency, connector, mass and mount |
| PCB 356A15 / 356A16 / 356A32; HBK 4524 / 4529; Kistler 8763B | IEP-TRI | Axis convention, connector pins, phase, dimensions and mass |
| PCB 393B04 / 333B50; Wilcoxon 731A | IEP-MOD | Noise bandwidth, low-frequency corner, overload and settling |
| PCB 480E09 / 482C15; NI-9234 acquisition reference | IEP-CON / IEP-DAQ | Current, compliance, coupling, output/input range and driver support |
Electrical checks before connection
Confirm excitation current, bias window, compliance headroom, AC swing, cable capacitance, grounding and input coupling. Check TEDS support independently of analog compatibility.
Mechanical and metrology checks before substitution
Verify mounting thread and depth, seating, torque, connector pinout, mass loading, environmental rating, sensitivity tolerance, transverse sensitivity, phase and usable frequency response.
SPECIFICATION → CONFIGURATION REVIEW
Build your IEPE inquiry
Include the sensor, cable and acquisition input as one measurement chain. Request model-specific specifications and calibration scope with your quotation.
Selected family: Replacement review
[email protected]